Flash Programming tools for micro controllers with on-chip or external Flash memory and core memory. Flasher is designed for programming flash targets stand-alone. Flasher connects via USB or via RS232 interface to a PC, running Microsoft Windows There are several flashers to cover ARM, M16C, M32C, R8C, R32C, M38000, ST9, Toshiba TLCS-870 and TMP91, ST7 and STM8
Segger also have fully portable flashers
Type |
Description |
Programming tool for microcontrollers with on-chip or external Flash memory and ARM core |
|
Programming tool for ST9 and Renesas M16C/20, M16C/62, M16C/80, M32C, R8C, R32C, M38 and M79 series of flash microcontrollers in serial mode |
|
Programming tool for Toshiba TLCS-870 series of flash microcontrollers and TMP91 in serial mode |
|
Programming tool for ST7 series of flash microcontrollers |
|
Programming tool for STM8 series of flash microcontrollers |
Flasher ARM is programming tool for microcontrollers with on-chip or external Flash memory and ARM core. Flasher ARM is designed for programming flash targets with the J-Flash software or stand-alone. In addition to that Flasher ARM has all of the J-Link functionality. Flasher ARM connects via USB or via RS232 and has a built-in 20-pin JTAG connector, which is compatible with the standard 20-pin connector defined by ARM.
Features:
Stand-alone JTAG/SWD programmer (Once set up, Flasher can be controlled without the use of PC program)
No power supply required, powered through USB
Support for ARM® 7/9 and Cortex-M3
Supports internal and external flash devices
64 MB memory for storage of target program
Can be used as J-Link (JTAG emulator) with a download speed of up to 720 Kbytes/second
Programming speed between 30-300 Kbytes/second depending on target hardware
Serial in target programming supported
Data files can updated as mass storage or via J-Flash
Target interface: JTAG/SWD
Power Supply |
USB powered, 100mA for Flasher ARM. 500 mA if target is powered by Flasher ARM |
USB Host Interface |
USB 2.0, full speed |
RS232 Host Interface |
RS232 9-pin |
Target Interface |
JTAG 20-pin (14-pin adapter available) |
Serial Transfer Rate between J-Link and Target |
up to 12MHz |
Supported Target Voltage |
1.8 - 5V |
Target supply voltage |
5V |
Target supply current |
Max. 400mA |
Operating Temperature |
+ 5 °C ... + 60 °C |
Storage Temperature |
- 20 °C ... + 65 °C |
Relative Humidity (non-condensing) |
< 90% rH |
Size (without cables) |
121mm x 66mmx 30mm |
Weight (without cables) |
120g |
Supported OS |
Microsoft Windows 2000, XP. XPx64 |
Programs M16C, M32C, R8C, R32C, M38000 and ST9 series of flash microcontrollers Support for RENESAS R8C/28, R8C29, M16C/64, M16C/65, M16C/6s
Flasher comes with an easy to use Windows program. It allows reading of program files in Motorola or Intel hex format.
Small, compact housing
Easy to use windows program
Serial (in target) programming supported
Programming / Verifying / Read back supported
2MByte internal Flash memory to store target program
High speed programming: app. 17 sec for 256 kb in serial mode with 10 MHz M16C target for programming and verification
Can be used in a production environment
PC program allows batch mode processing for usage in automated test systems.
Once set up, Flasher can be controlled without the use of PC program
ASCII command interface to control Flasher without the use of PC program (Requires firmware version 1.84 or above)
Programs Toshiba TLCS-870 and TMP91 series of flash microcontrollers The following microcontrollers are supported: TMP86FM25F; TMP86FM29UG; TMP86FM24F; TMP91FY27
Flasher comes with an easy to use Windows program. It allows reading of program files in Motorola or Intel hex format.
Small, compact housing
Easy to use windows program
Serial (in target) programming supported
Programming /Clearing/ Verifying / Read back supported; High speed programming
512 KByte internal Flash memory to store target program
Can be used in a production environment
PC program allows batch mode processing for usage in automated test systems.
Once set up, Flasher can be controlled without the use of PC program
Remote control functions for automated testers
ASCII command interface for automated programming
Programs ST7 series of flash microcontrollers with on-chip flash
ST7FLiteU05, ST7FLiteU09,
ST72F325R9, ST72F325J9,
ST7LiteUS5
ST7Lite19B supported.
Flasher comes with an easy to use Windows program. It allows reading of program files in Motorola or Intel hex format.
Small, compact housing
Easy to use windows program
Serial (in target) programming supported
Programming / Verifying / Read back supported
OPTION BYTE Programming supported
512 KByte internal Flash memory to store target program
High speed programming: app 12 sec for 60 kb in serial mode with 16 MHz target clock for programming and verification
Can be used in a production environment
PC program allows batch mode processing for usage in automated test systems.
Once set up, Flasher can be controlled without the use of PC program
ASCII command interface to control Flasher without the use of PC program (Requires firmware version 1.84 or above)
Flash programmer for STM8 series of flash microcontrollers with on-chip flash
Flasher comes with an easy to use Windows program. It allows reading of program files in Motorola or Intel hex format.
Features
All STM8 devices can be programmed
Integrated optical isolation between host and target system
Standard 4-pin SWIM connector
USB 2.0 interface
Full duplex 100Mbit Ethernet interface
Target voltage can be measured & monitored during program
Fully plug and play compatible
USB, Ethernet, RS232 and 4-pin ribbon cable included
Windows PC software included
Target power supply via pin 1 of the 4-pin interface (up to 300mA to target with overload protection)